Interval Chain

Blockchain for Innovation NOT Speculation

Despite Bitcoin turning out to be a Big Con in real life, the original design of Bitcoin technology does have some very good features we can make use of in Interval Chain.

1. Bitcoin Background

Removing greed and ignorance from Bitcoin, there are some cool technologies. Although we do NOT use proof of work, a lot of the other features of the original Bitcoin protocol are still relevant to us.

Understanding how Bitcoin technology works is the first step in understanding one of the major building blocks of Interval Chain.

Bitcoin Core Fork

Interval Chain requires a trusted storage and is blockchain design agnostic, currently its uses the open sourced software which is a fork of the battle proven Bitcoin Core software, however most other blockchain implementations can be used.

The version of Bitcoin Core used by was forked at version 0.10 with patches from later versions applied as appropriate by Note we are talking about the software which has NOTHING to do with nor

Interval Chain makes use of some open sourced Bitcoin Core technologies, otherwise it has nothing to do with the Bitcoin network. We are just reusing parts of the Bitcoin Core software to build our storage nodes. We could have used Ethereum etc. instead, but we are starting with Bitcoin Core as it is simpler for what we wanted to do initially.

Interval Chain Features

Interval Chain uses features from Bitcoin Core as well as extra features added by Multichain:.

  1. Cold Nodes
  2. Multi Signatures

Interval Chain Parameters

Blockchain Parameters:

Runtime Parameters:

Scroll up and sideways within the boxes to see all parameters.


Chain Options:
  -alertnotify=<cmd>     Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)
  -blocknotify=<cmd>     Execute command when the best block changes (%s in cmd is replaced by block hash)
  -checkblocks=<n>       How many blocks to check at startup (default: 288, 0 = all)
  -checklevel=<n>        How thorough the block verification of -checkblocks is (0-4, default: 3)
  -conf=<file>           Specify configuration file
  -daemon                Run in the background as a daemon and accept commands
  -datadir=<dir>         Specify data directory
  -dbcache=<n>           Set database cache size in megabytes (4 to 4096, default: 100)
  -loadblock=<file>      Imports blocks from external blk000??.dat file on startup
  -loadblockmaxsize=<n>  Maximal block size in the files specified in -loadblock
  -maxorphantx=<n>       Keep at most <n> unconnectable transactions in memory (default: 50000)
  -par=<n>               Set the number of script verification threads (-4 to 16, 0 = auto, <0 = leave that many cores free, default: 0)
  -pid=<file>            Specify pid file
  -reindex               Rebuild the blockchain and reindex transactions on startup.
  -shortoutput           Returns connection string if this node can start or default address otherwise
  -txindex=0|1           Maintain a full transaction index, used by the getrawtransaction rpc call (default: 1)

Block creation options:
  -gen=0|1               Generate coins (default: 1)
  -genproclimit=<n>      Set the number of threads for coin generation if enabled (-1 = all cores, default: 1)
  -blockmaxsize=<n>      Set maximum block size in bytes

Runtime parameters
  -offline                                 Start in offline mode, no connections to other nodes.
  -storeruntimeparams                      Permanently save modifications to runtime parameters made by setruntimeparam APIs.
  -initprivkey=<privkey>                   Manually set the wallet default address and private key when running for the first time.
  -handshakelocal=<address>                Manually override the wallet address which is used for handshaking with other peers in a blockchain.
  -lockadminminerounds=<n>                 If set overrides lock-admin-mine-rounds blockchain setting.
  -miningrequirespeers                     If set overrides mining-requires-peers blockchain setting, values 0/1.
  -mineemptyrounds=<n>                     If set overrides mine-empty-rounds blockchain setting, values 0.0-1000.0 or -1.
  -miningturnover=<n>                      If set overrides mining-turnover blockchain setting, values 0-1.
  -shrinkdebugfilesize=<n>                 If shrinkdebugfile is 1, this controls the size of the debug file. Whenever the debug.log file reaches over 5 times this number of bytes, it is reduced back down to this size.
  -shortoutput                             Only show the node address (if connecting was successful) or an address in the wallet (if connect permissions must be granted by another node)
  -bantx=<txids>                           Comma delimited list of banned transactions.
  -lockblock=<hash>                        Blocks on branches without this block will be rejected
  -chunkquerytimeout=<n>                   Timeout, after which undelivered chunk is moved to the end of the chunk queue, default 25s
  -chunkrequesttimeout=<n>                 Timeout, after which chunk request is dropped and another source is tried, default 10s
  -flushsourcechunks=0|1                   Flush offchain items created by this node to disk immediately when created, default 1
  -acceptfiltertimeout=<n>                 Timeout, after which filter execution will be aborted, when accepting new txs, in milliseconds, default 100
  -sendfiltertimeout=<n>                   Timeout, after which filter execution will be aborted, when tx is sent from this node, in milliseconds, default 20
  -lockinlinemetadata=0|1                  Outputs with inline metadata can be sent only using create/appendrawtransaction, default 1
  -purgemethod=<method>                    Overwrite data before purging. Available modes: unlink, simple(=zero, default), one, zeroone, random1-random4, dod, doe, rcmp, gutmann.


Connection options:
  -addnode=<ip>          Add a node to connect to and attempt to keep the connection open
  -banscore=<n>          Threshold for disconnecting misbehaving peers (default: 100)
  -bantime=<n>           Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
  -bind=<addr>           Bind to given address and always listen on it. Use [host]:port notation for IPv6
  -connect=<ip>          Connect only to the specified node(s)
  -discover=0|1          Discover own IP address (default: 1 when listening and no -externalip)
  -dns=0|1               Allow DNS lookups for -addnode, -seednode and -connect (default: 1)
  -dnsseed=0|1           Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)
  -externalip=<ip>       Specify your own public address
  -forcednsseed          Always query for peer addresses via DNS lookup (default: 0)
  -listen=0|1            Accept connections from outside (default: 1 if no -proxy or -connect)
  -maxconnections=<n>    Maintain at most <n> connections to peers (default: 125)
  -maxoutconnections=<n> Open at most <n> outbound connections to peers (1-32, default: 8)
  -maxreceivebuffer=<n>  Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
  -maxsendbuffer=<n>     Maximum per-connection send buffer, <n>*1000 bytes (default: 100000)
  -onion=<ip:port>       Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy)
  -onlynet=<net>         Only connect to nodes in network <net> (ipv4, ipv6 or onion)
  -permitbaremultisig    Relay non-P2SH multisig (default: 1)
  -port=<port>           Listen for connections on <port>
  -proxy=<ip:port>       Connect through SOCKS5 proxy
  -seednode=<ip>         Connect to a node to retrieve peer addresses, and disconnect
  -timeout=<n>           Specify connection timeout in milliseconds (minimum: 1, default: 5000)
  -retryinittime=<n>     Number of seconds during which an initial connection is retried before the node quits (default: 0)
  -whitebind=<addr>      Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6
  -whitelist=<netmask>   Whitelist peers connecting from the given netmask or IP address. Can be specified multiple times.
                         Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway

RPC server options:
  -server=0|1               Accept command line and JSON-RPC commands
  -rest                     Accept public REST requests (default: 0)
  -rpcbind=<addr>           Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)
  -rpcuser=<user>           Username for JSON-RPC connections
  -rpcpassword=<pw>         Password for JSON-RPC connections
  -rpcport=<port>           Listen for JSON-RPC connections on <port>
  -rpcallowip=<ip>          Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g., a network/netmask (e.g. or a network/CIDR (e.g.
                            This option can be specified multiple times
  -rpcallowmethod=<methods> If specified, allow only comma delimited list of JSON-RPC <methods>. This option can be specified multiple times.
  -rpcthreads=<n>           Set the number of threads to service RPC calls (default: 4)
  -rpckeepalive             RPC support for HTTP persistent connections (default: 0)

RPC SSL options
  -rpcssl                                  Use OpenSSL (https) for JSON-RPC connections
  -rpcsslcertificatechainfile=<file.cert>  Server certificate file (default: server.cert)
  -rpcsslprivatekeyfile=<file.pem>         Server private key (default: server.pem)
  -rpcsslciphers=<ciphers>                 Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)

API response parameters
  -hideknownopdrops      Remove recognised OP_DROP metadata from the responses to JSON-RPC calls (default: 0)
  -maxshowndata=<n>      The maximum number of bytes to show in the data field of API responses. (default: 16384)
                         Pieces of data larger than this will be returned as an object with txid, vout and size fields, for use with the gettxoutdata command.
  -maxqueryscanitems=<n> The maximum number of txs to be decoded during JSON-RPC querying commands. (default: 5000)


Wallet options:
  -keypool=<n>              Set key pool size to <n> (default: 1)
  -paytxfee=<amt>           Fee (in BTC/kB) to add to transactions you send (default: 0.00)
  -rescan                   Rescan the block chain for missing wallet transactions on startup
  -salvagewallet            Attempt to recover private keys from a corrupt wallet.dat on startup
  -skipwalletchecks         Skip wallet consistency verification on startup
  -sendfreetransactions     Send transactions as zero-fee transactions if possible (default: 0)
  -spendzeroconfchange=0|1  Spend unconfirmed change when sending transactions (default: 1)
  -txconfirmtarget=0|1      If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: 1)
  -maxtxfee=<amt>           Maximum total fees to use in a single wallet transaction, setting too low may abort large transactions (default: 0.10)
  -wallet=<file>            Specify wallet file (within data directory) (default: wallet.dat)
  -walletnotify=<cmd>       Execute this command when a transaction is first seen or confirmed, if it relates to an address in the wallet or a subscribed asset or stream.
  -walletnotifynew=<cmd>    Execute this command when a transaction is first seen, if it relates to an address in the wallet or a subscribed asset or stream.
                            (more details and % substitutions online)
  -walletdbversion=2|3      Specify wallet version, 2 - Berkeley DB, 3 (default) - proprietary
  -autosubscribe=<params>   Automatically subscribe to new streams and/or assets, as a comma dlimited list of subscriptions.
  -zapwallettxes=<mode>     Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup
                            (1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)

Wallet optimization options:
  -autocombineminconf=<n>    Only automatically combine outputs with at least this number of confirmations, default 1
  -autocombinemininputs=<n>  Minimum inputs in automatically created combine transaction, default 50
  -autocombinemaxinputs=<n>  Maximum inputs in automatically created combine transaction, default 100
  -autocombinedelay=<n>      Minimium delay between two auto-combine transactions, in seconds, default 1
  -autocombinesuspend=<n>    Auto-combine transaction delay after listunspent API call, in seconds, default 15


Debugging/Testing options:
  -debug=<category>      Output debugging information (default: 0, supplying <category> is optional)
                         If <category> is not supplied, output all debugging information.
                         <category> can be: addrman, alert, bench, coindb, db, lock, rand, rpc, selectcoins, mempool, net,
                                            mchn, mcblock, mcnet, mcminer, mcapi, wallet, filter, v8filter, chunks, offchain
  -help-debug            Show all debugging options (usage: --help -help-debug)
  -logips                Include IP addresses in debug output (default: 0)
  -logtimestamps=0|1     Prepend debug output with timestamp (default: 1)
  -limitfreerelay=<n>    Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:0)
  -minrelaytxfee=<amt>   Fees (in BTC/Kb) smaller than this are considered zero fee for relaying (default: 0.00001)
  -printtoconsole        Send trace/debug info to console instead of debug.log file
  -logdir                Send trace/debug info to specified directory
  -shrinkdebugfile=0|1   Shrink debug.log file on client startup (default: 1 when no -debug)