Community Alias Usage Guide

[oztralia]

In order to send fuzzy data anonymously, a Community Alias is required.

Requirement: Area Alias

The Area Alias needs to be 24 hours or more before it can be upgraded to Community Alias. In the example below, the upgrade to Community Alias can not be done before 14:03 on 12-May-2025/

To upgrade to a Community Alias:

1. Open Chrome on Android or Safari on iOS and go to https://console.aunsw.88.io,click on the button located at the top left hand corner, then click on Dynamic Alias -> Alias List -> Create Alias -> click on the button which will turn to
   NOTE: Do not close this window. If closed, the steps will need to be repeated.

2. Within 60 seconds, ring +61 138813 or +61499 311 111 from the phone number shown.

3. A pop-up window of ok:verified will be displayed. Close this pop-up window and click on the button and follow the prompt.

5. The Community Alias is ready when the Wallet creation completed message is displayed.
   
   

If after more than 5 minutes, there is no Wallet creation completed message, please go to Dynamic Alias -> Alias Wallet -> Click on the Continue button to complete the wallet creation process.

After the Wallet creation completed message is shown, please go to Dynamic Alias -> Alias List -> Alias Management -> click on the newly created Community Alias -> Save Alias so the alias and wallet will be saved to your local device storage.

Multiple Aliases

To see the list of all aliases created, open Chrome on Android or Safari on iOS and go to https://console.aunsw.88.io,click on the button located at the top left hand corner, then click on Dynamic Alias -> Alias List -> Alias Management .

Clicking the Community in the Type column will allow users to save the alias. This alias can be imported back if needed by clicking on the Import Alias button.

NOTE: For Safari on iOS version 18.5 or higher, the Alias is not automatically downloaded. It is
only displayed in the Download list and it needs to be manually downloaded. Click on the down blue arrow to show the Download list.

Then click on Downloads to display the alias.

Click on the alias and then click on the down arrow (see the purple circle below) and click on the Save to Files to download the alias.

[admin]

Create Community Alias

You can create many different Community Alias for yourself on your Personal Console using the Alias Creation Form (the Form).

1. Alias Creation Form

• Automatic
  When you do NOT have a Community Alias loaded in your Personal Console when accessing any Community Alias features, the Form will pop-up AUTOMATICALLY.

• Manual
  You can also access the Form MANUALLY by clicking on the Circle Menu Button (located at the top-left corner of your Personal Console) and then select Dynamic Alias then Alias Management then Create Alias.

2. Identification

Once the Form appears, you will need to fill in the input fields on that Form, before pressing the [Create] button at the bottom of the Form.

For creating a Community Alias under au.88.io, your phone number is required. Other citizen ecosystems might require less or more identification information.

In all cases, your identification information are protected by Fuzzy Block technology.

3. Phone

Please enter you personal phone number in the Phone input box. The phone number must on a mobile phone that you have exclusive access to.

The phone number must in International format with the country code in front.
e.g.

Country	Sample Phone Number
Australia	61 411 111 111
China	86 131 1111 1111
United States of America	1 231 111 1111

4. Verify

For creating a Community Alias under au.88.io, you can call phone number 138813 if you are in Australia or call international phone number +614 99331111 if you are overseas.

Calling +61 138813 might work from some phone networks outside of Australia.

5. PIN

Please enter a personal identification number of at least 8 digits.

5.1. Make it EASILY

PIN can derived from simple numbers that you already know well:

• Birthday 1234-56-78 becomes 12567834, 56781234 etc.
  e.g.
  2024-03-18 becomes 20031824, 03182024

• Year 1234 becomes 12341234, 12123434 etc.
  e.g.
  1997 becomes 19971997, 19199797

• Street Number 12 becomes 12121212, 11112222
  e.g.
  38 becomes 38383838, 33338888

• Use matching letter to digit on phone key pad
  e.g.
  A GOOD PIN becomes 24663746

5.2. Make it LONG

You can repeat the a number to make it longer e.g. take a number from above and repeat it to create a 16 digit PIN.

5.3. HIDE it well

Since the PIN is rare used, you are going to forget it. Store it in a secure place e.g. Write it down in a notebook with a lot of other numbers or store it in a LOCAL password manager.

TIP:
Create some fake contacts in your address book and distribute the PIN amongst them e.g. in their phone number, street number, birthdays etc.

6. Wallet

A blockchain wallet will be created for the 2024au Interval Coin.

The Community Alias is ready when the "Wallet creation completed" message is displayed.

If after more than 5 minutes, there is no Wallet creation completed message, please go to Dynamic Alias -> Alias Wallet -> Click on the Continue button to complete the wallet creation process.

[oztralia]

Community Applications

In the addition to the features and applications available only to Community Alias users, all Private Applications and Area Applications are also included for Community Alias users.

[oztralia]

Alias List

Alias Details

• Manage Label - TO BE UPDATED

• Hub Info

• Alias Keys
  For more information, please click here.

[oztralia]

Alias Verification

Identity Verification

• Phone Number - Call In
  By verifying the mobile number, the alias will be upgraded to the Personal Alias

• Primary ISP - Browser Agent
  This is not available for Community Alias users.

• Email Address - Mail Out
  Phone Number verification is required.

• Charge Card - Credit Card
  Phone Number verification is required.

• Identity Card - AU Medicare Card
  Credit Card verification is required.

• Photo Card - AU Driver License
  Credit Card verification is required.

• National Passport - AU Passport
  Credit Card verification is required.

Location Verification

• Night Block
  This is to verify the current local block.

• Day Block
  This is to verify the current global block.

• Local ISP - Browser Fingerprint
  This is not available for Community Alias users.

• Device Verification
  This function is no different to verifying the device when becoming an Area Alias user.

• Last Residential Verification
  The result of a successful residential verification will be displayed here.

• Commercial Verification
  The result of a successful commercial verification will be displayed here.

Check Verification

This feature allows users to check the verification authenticity against the session token. In the example below, the Basic Location is checked.

Types supported:

• Phone
• Basic Location
• Browser
• Credit Card
• Day Block
• Driver License
• Email
• Last ISP
• Medicare
• Night Block
• Passport
• Primary ISP
• Residence
• Region
• Venue

Show Verification

Types supported:

• Phone
• Browser
• Credit Card
• Driver License
• Email
• Medicare
• Passport
• Residence
• Basic Location

Verification Log

If there are logs found, they will automatically be displayed. In the example below, 4 Basic Location logs are found.

Types supported:

• Phone
• Browser
• Credit Card
• Driver License
• Email
• Medicare
• Passport
• Residence
• Basic Location

[oztralia]

Alias Wallet

• Bronze Coin
  In the example below the Console has 5 and the Ecosystem has 4. It means there are 5 location pins added and 4 status submitted.
  Key: keyintervalcoin.com (default)
  Address: address.intervalcoin.com (default)
  Signature: signature.intervalcoin.com (default)
  Chain: bronze2024-aunsw0.intervalcoin.com (default)
  PrivateKey: there is a minimum of 3 keys, depending on the key selected during installation.

• Silver Coin
  Credit Card verification required.

[oztralia]

Anonymous Interaction

Alias Text

Alias Text allows users to send and receive messages to and from other users by using their Alias IDs and the optional Text Code.

If Text Code is used when sending the message, the receiver must also enter the same Text Code and the Sender's Alias in order to view the message received. Without the Text Code, the message will still be displayed but encrypted.

Alias Notification

There are two Ringtone types:

• Status (Not available for Community Alias users)
• Alias

Alias Ringtone will ring the receiver's mobile phone when there is an Alias message received. In the example above:

• The Caller ID shown on the receiver's mobile is 61282050080
• The Mobile number to be dialled is 61410311082
• The Code that needs to be entered is 123
• Messages sent from All aliases are accepted (you can also enter specific Alias IDs)
• This ringtone setting no longer works after 08-May-2026

If the alias ringtone has been successfully created, it will be shown as below

View Image

View Image allows an encrypted image from other users (aliases) to be viewed using a once-off shortlink. In the example below the shortlink is /bqofnnqtycdp/picture/shdb5zyk1qcq0m240913-gayrvsfyymjwpudagvrt.jpg which is placed in the Path field.

[oztralia]

Citizen Timeline

Pin List

Please click here.

Government Area

• Speed Limit Alert
  Being developed

• Virtual Vaccine

  • Vaccination
    Share, store and list the vaccination types and dates.
  • Test
    Share, store and list the PCR and/or Rapid Antigen test and dates.
  • Quarantine
    Share, store and list the Quarantine Start Date and End Date.
  • Symptoms
    Share, store and list the Symptoms including the Start Date and the End Date.
  • Risks
    Display areas of Covid positive cases in the last 28 days.
  • Masks
    Share, store and list the types of Mask used.
  • Share
    Share the type of identity and fuzziness.

• Venue Permission
  Being developed

Publish Pins

When ticked, the event will be submitted to the correspondent server location. In the example below, Status is ticked for Private

Every time a Status is submitted on console.aunsw.88.io, a post will be displayed on hub.quuvoo4ohcequuox.0.88.io

Both Public and Event are for sending posts to be displayed on https://hub.aunsw.88.io when ticked. The difference is Event is the shorter and simple version of the post.

In the example below, Pin is ticked for Public and Event.

Event - simple version

Public - details version

By default, all are set to Local. The other options are Global, Local Hash and Global Hash.

Global

{
    "subject" : "#loc_pin",
    "pin" : "#pin_u39kosgz9izx26cy9rwmaoqffav5yriqgh3t0swg",
    "alias" : "#alias_mpwgq2evox3zinq1tbt0rvilmdsgipkwijoy33dj",
    "blockid" : "#bi_xcsttxlvxt01wvnoictsqyvysiqc2c1t2qefllxb",

    "date" : "#dt_20250409",

    "lat" : "-33.8797864",
    "lon" : "151.2048335",
    "ts" : "1744166417258",
    "alt" : "",
    "spd" : "",
    "accu" : "5",
    "brg" : "undefined",

    "srcname" : "console.aunsw.88.io",
    "srcarea" : "#a_0034_151",
    "srctime" : "#t_1744100000",
    "srctx" : "#tx_4lb0dob2a6mhyttjmadrhoxtey4tkyk6v4yfetv3",
    "srcsign" : "00E2ulhBdjGZfuzNz2qhEohduo3kouP2D0KbV55AYlIe77eDkpMHDUR4STxCLgvG2Am31Rxg3h34qWI_ZzsjCQ"
}

Local Hash

{
    "subject" : "#loc_pin",
    "pin" : "#pin_fmlvc32jgybkzep7x6xf8mve1t9flvfgppmbajcl",
    "alias" : "#alias_mpwgq2evox3zinq1tbt0rvilmdsgipkwijoy33dj",
    "blockid" : "#bi_xcsttxlvxt01wvnoictsqyvysiqc2c1t2qefllxb",

    "date" : "#dt_20250409",

    "lat" : "-33.8797805",
    "lon" : "151.2047727",
    "ts" : "1744166766007",
    "alt" : "",
    "spd" : "",
    "accu" : "5",
    "brg" : "undefined",

    "srcname" : "console.aunsw.88.io",
    "srcarea" : "#a_2tiINkhXPdlO1Z_f-RRFnmWS7PCYMbmyir1VVVpS",
    "srctime" : "#t_1744165800",
    "srctx" : "#tx_4lb0dob2a6mhyttjmadrhoxtey4tkyk6v4yfetv3",
    "srcsign" : "92f3c9DlSXuPIUEmQS243BWrtXazzGE5cViEJogsqC-bAZmbLeZ9nAjS5k3o3xp6i7CisRMHCKQtRyKTiPK3Dw"
}

Global Hash

{
    "subject" : "#loc_pin",
    "pin" : "#pin_lwcwxkvjmis7bwpudwpou8gd7x6xyqlbdsbgbdu1",
    "alias" : "#alias_mpwgq2evox3zinq1tbt0rvilmdsgipkwijoy33dj",
    "blockid" : "#bi_xcsttxlvxt01wvnoictsqyvysiqc2c1t2qefllxb",

    "date" : "#dt_20250409",

    "lat" : "-33.8797926",
    "lon" : "151.2048033",
    "ts" : "1744166822575",
    "alt" : "",
    "spd" : "",
    "accu" : "5",
    "brg" : "undefined",

    "srcname" : "console.aunsw.88.io",
    "srcarea" : "#a_Kro_KE6F02yuWl4DvKH_vm5Ibh_JIdpCkHyMWihY",
    "srctime" : "#t_1744100000",
    "srctx" : "#tx_4lb0dob2a6mhyttjmadrhoxtey4tkyk6v4yfetv3",
    "srcsign" : "zDfJp36P5rj0iBiAFJUJ-TrG-lXiVm432QAUCO5xk0_Q13tucYJoWW9eJFLgedvY60pk04ldUW07fEtWvy9dDA"
}

Blockchain

This allows users to verify the authenticity of the signature by putting the first 40 characters of the srcsign. In the example below, the Status is checked against the srcsign which is
EZrrvAh6vEa6tD51v9ckjrv6LOc-mHfVYlQIZIr8

[oztralia]

Infinite Disk - TO BE UPDATED

Client Encryption

Data Vault

The first step is to create an account by clicking on the Create Account link at the bottom.

Enter the blank fields and click on Submit button. The email address is located at Area Entity -> Entity Agent -> Agent A -> Application

Once completed, the web site will return to https://vault.vahfoom3iquahfah.infinitedisk.com. Enter the email address and the Master password and click on the Log In button.

File Transfer - To be updated

File Encryption

Manual file encryption that can be performed offline locally within the browser ensuring that no one but you have access to the password or private key used.

A file can be encrypted or decrypted with either Password or Keys.

Please click here for more details.

File Download

Server Encryption

S3 Storage - To be updated

SMB Storage - To be updated

SFTP Storage - To be updated

WebDAV Storage - To be updated

[oztralia]

Area Entity

IP Location

IP Area Collection

There are 4 types of Area to Submit:

• Region Area
• Global Area
• District Area
• Local Area

There are 3 options for IP Type:

• Mobile IP
• Dynamic IP
• Static IP

In the example below is the result when Region Area and Mobile IP are submitted

{
	"subject" : "#loc_iplocation",
	"pin" : "#pin_ljczjrywzxdfd11c7fzg27w5pfo6w0qurfaywcqu",
	"alias" : "#alias_jocwlxb94kzqkcnwvusw1dd1kg5deyatmak8gzze",
	"id" : "#id_220.233.67.8region",
	"blockid" : "#bi_6iquaqyjxhasmmm8pv87udg3dykzbgrjivs1v3wr",

	"srcname" : "console.aunsw.88.io",
	"srcarea" : "#a_0033880_151204",
	"srctime" : "#t_1739415600",
	"srctx" : "#tx_na1b4waopk517yuqtlh7jobt5djq0pmulp0s9rht",
	"srcsign" : "6Fv6CdT3WxQQf2SeQMAx-jY3fjkXhYd0nq91SY10KsB-1YADdApaotlmnVzBbogt8WPyLuSrS-9KlXX-s2N9Ag"
}

IP Region Correction

This allows the region to be corrected based on the IP address. In the example below, the IP address belongs to the NSW region, therefore nothing changed.

Area Applications

For Area Applications, please click here.

[oztralia]

Community Entity

There are 6 sub-menus available:

• Introduction
• Entity Agent
• Agent Session
• Phone Services
• Storage Services
• Link Hub Token

Introduction

The introduction takes you to Community Entity which explains what Community Entity is.

Entity Agent

Three sets of Entity Agent are available and they all have identical submenus. Agent cluster defines the Entity Agent used and by default, Agent A is the active cluster in use.

[oztralia]

Agent Session

Session List

To create a session to be used by Traccar, Owntracks or Home Assistant app, a minimum of one coin in the wallet is required.

Simply submit a status on a location pin and a coin will be added to the wallet. For more details about the wallet, please click here.

In the example above, the session ID is ab45ea01a8a0e0cf0d8a7cf893692cb6. Clicking on the Create button will create a new session.

To copy the session for the app e.g: Owntracks, simply click on the OwnTracks link and the session will be copied to the clipboard automatically.

Paste the link to the URL field in the Owntracks app.

Session Map

Session Map displays the movement of the mobile device on the map based on the app used, whether it is from Traccar, Owntracks or Home Assistant. There are two different maps available, Private View and Public View..

Private View

Private View is intended to be accessed by the owner and it has more available settings.

Public View

Public view has less settings and mainly for view (read only) which can be shared to others.

[oztralia]

Phone Services

There are 5 applications available

1. Voice Service
2. Mail Service
3. Conference Service
4. Text Service
5. Exchange Service

[oztralia]

Voice Service

This is a web based phone application that allows users to make and receive voice calls as well as text messages across different platforms, such as:

1. Chrome on Windows 11
2. Chrome on Android
3. Safari on iOS

Requirements

Home Assistant installations for

• Windows
• Android
• iOS

Home Assistant settings can be found at

• For Android
• For iOS

Set Up

The web address is https://phone.quuvoo4ohcequuox.0.88.io and if this is your first time, you may get a prompt that the browser wants to use the camera and the microphone.

IMPORTANT: this permission must be allowed by selecting the Allow button.

Then select the Account menu

Enter the following details:

1. Full Name: your name, e.g: Robin Hood
2. SIP Username, e.g: 123456 (available from the Exchange Service)
3. SIP Password: e.g: 123456789012 (available from the Exchange Service)
4. Extension Number: MUST be the same as the SIP Username, e.g: 123456

The rest of the fields can be left as default. Scroll down to the bottom of the page and click on the Save button. The Reload Required pop-up window will appear, simply click on the OK button to continue.

If the registration is successful, you should see the dial pad. This will allow you to make and receive voice calls.

To be able to send and receive text messages, please click on the Add User button to add the SIP Username of the user you want to send the text to. That user MUST also add your SIP Username on their device.

In the example below:

1. Full Name: Iphone
2. Extension including Message Exchange MUST be selected
3. Extension Number: the SIP Username of the remote user

Once the Add button has been clicked, the iPhone user will be shown.

OPTIONAL

To show an avatar, add a contact number or an email address, click on the button and select Configure Extension -> Appearance.

Upload an image, enter your details and click on the Save button.

If successfully saved. your image will be visible by you and other users who add your SIP Username.

Voice Calls

1 - Mute Microphone
2 - Call on Hold
3 - Send DTMF
4 - End Call
5 - Record Call
6 - Conference Call
7 - Call Forward
8 - Speakerphone/Headset selection
9 - Call Connection Statistics
10 - Call History

Standard Voice Calls

The Home Assistant app needs to be running (can be in the background).

To make a call, click on the button which will display the dial pad. Enter the SIP Username of the user you want to ring and press on the button.

If there is a history of a voice call or a text message exchange, you can also click on the name of the user directly and click on the call button.

Caller

After dialling, there will be a Please hold, your call is being connected to most appropriate device voice prompt.

There is an option to leave a voice message to the callee without connected to the callee's device. To do this, while the call is being connected, select the button, press 1 and leave the message.

If you do not have an internet access, you can still make a call by ringing +61 499 331 111 and follow the voice prompt. There are two options, to join a Meeting or dial a SIP number.

if the caller chooses to join a meeting by calling +61 499 331 111, then an existing meeting must already be available, and the caller will need to enter the meeting number to join.

Callee

When there is an incoming call to the phone, there will be a normal incoming call to your device from one of our numbers, e.g: 0499 331 111. Once you answer this call, the call will automatically be disconnected.

This call is just a notification to let you know that there is an incoming call to the phone. Simply open the notification and select the Home Assistant Incoming Call from notification.

On iOS, long press the notification to display the Webphone, Meeting and Voicemail.

On Android, simply select the down arrow key to display the Webphone, Meeting and Voicemail.

Webphone

If Webphone is selected, it will open the Incoming Call page which will enable you to accept the call. If you decide not to accept the call, simply select the Reject Call button which will prompt the caller to leave a voice message.

Meeting

If meeting is selected, the caller will be transferred to the Meeting page of the callee automatically.

Voicemail

If voicemail is selected, the caller will be prompted to leave a voice message which is emailed to user@quuvoo4ohcequuox.0.88.io.

The voice messages are also accessible by dialling *98 from the Webphone and enter the first 4 digits of the SIP password (available from the Exchange Service)

Call Transfer

To transfer call, select the button (which will automatically put the current call on hold) and enter the number you want to transfer to.

In the example below, the number entered is 299947 and you can either do a Blind Transfer or an Attended Transfer.

Blind Transfer

A Blind Transfer will forward the current call without having to wait for the receiving party to answer. In the example above, if the Blind Transfer is selected, number 190830 will be connected to 299947 regardless whether 299947 answers the call or not.

Attended Transfer

An Attended Transfer requires the forwarded call to be answered by the receiving party first. Once the call is answered, the person who initiates the call transfer can then connect number 190830 to number 299947 or cancel the transfer.

Conference Call

To initiate a Conference Call, select the button (which will automatically put the current call on hold) and enter the number you want to invite to join the conference call and press the Call button.

Text Messages

IMPORTANT:
To be able to send or receive messages. each user must be added in each other's device by selecting the Extension including Message Exchange.

The two ticks indicates that the message has been successfully delivered to a user called iPhone.

[oztralia]

Mail Service

The Mail Service is a mailbox where the voicemail left will be received.

The username is the 6 digit Internet Number (SIP Number) located in the Exchange Service followed by @quuvoo4ohcequuox.0.88.io, e.g: 123456@quuvoo4ohcequuox.0.88.io.

The password is the same 12 character password used by the Webphone

[oztralia]

Conference Service

With Online Meeting, you can either start a meeting or join a meeting.

To start a meeting, enter the email addresses of the participants to be invited (optional) and then click on the button.

Below is the example of the email sent out to the invited participants

owner: ongjydkrdxmp
room ID: 7i7yi1vney1d
url: https://phone.quuvoo4ohcequuox.0.88.io/join.php?roomId=7i7yi1vney1d

To join this meeting by phone, dial:
 +61499331111
Then enter
 80661
as the Conference PIN number.

Alternatively, you can join a meeting on console.aunsw.88.io by entering the Room ID, the Display Name and then click on the button (see the image above)

[oztralia]

Text Service

To be continued

[oztralia]

Exchange Service

To be continued

Alias Phone allows users to communicate to other users using the Voice Services. To create an Alias Phone, enter the Destination Number field, e.g: 6128xxxxxxxx and click on the Register button.